|
-port RS-232/422/485 serial device servers
Features and Benefits
- 8 serial ports supporting RS-232/422/485
- Compact desktop design
- 10/100M auto-detecting Ethernet
- Built-in 15 KV ESD protection for all serial signals
- Easy IP address configuration with LCD panel
- Choice of confi guration methods: Web console, Telnet console, and Windows utility
- Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
- SNMP MIB-II for network management
- Built-in recorder: Use your own voice as the alert when exceptions occur
Convenient Design for RS-485 Applications
The NPort¢ç 5650-8-DT device servers support selectable 1K-ohm and 150K-ohm pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort¢ç 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.
Convenient Power Inputs
The NPort¢ç 5650-8-DT device servers support both a power terminal block and power jack for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adaptor.
LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort¢ç 5600¡¯s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Two Ethernet Ports for Convenient Cascade-style Wiring
The NPort¢ç 5600-8-DT device servers come with two Ethernet ports that can be used as Ethernet switch ports. Connect one port to the network or server, and the other port to another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs.
Automatic Warning Function by Speaker and/or E-mail
The built-in speakers can be used to alert administrators of problems with the Ethernet links or power input. The web console indicates which Ethernet link or power input has failed. An e-mail warning can also be issued when an exception is detected. These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations.
Appearance
Dimensions
Pin Assignment
Introduction
NPort¢ç 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort¢ç 5600-8-DT device servers have a smaller form factor compared to our 19" models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.
LAN Interface |
Number of Ports |
2 |
Speed |
10/100 Mbps |
Connector(s) |
8-pin RJ45 |
Magnetic Isolation Protection |
1.5 KV built-in |
• Serial Interface |
Serial Standards |
NPort¢ç 5610-8-DT: RS-232 NPort¢ç 5650-8-DT: RS-232/422/485 |
Number of Ports |
8 |
Connectors |
NPort¢ç 5610-8-DT/5650-8-DT/5650I-8-DT: DB9 male NPort¢ç 5610-8-DT-J/5650-8-DT-J: RJ45 (8 pins) |
Serial Line Protection |
15 KV ESD protection for all signals 2 KV isolation protection (NPort¢ç 5650I-8-DT only) |
RS-485 Data Direction Control |
ADDC¢ç (automatic data direction control) |
• Serial Communication Parameters |
Data Bits |
5, 6, 7, 8 |
Stop Bits |
1, 1.5, 2 |
Parity |
None, Even, Odd, Space, Mark |
Flow Control |
DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF |
Baudrate |
50 bps to 921.6 Kbps |
• Serial Signals |
RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
RS-422 |
Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w |
Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w |
Data+, Data-, GND |
• Software |
Network Protocols |
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217 |
Driver Support |
Windows Real COM driver (for Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64), Linux Real TTY driver, Fixed TTY driver (for SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i) |
Configuration Options |
Web Console, Telnet Console, Windows Utility |
• Mini Screen with Push Buttons |
LCD Panel |
Liquid Crystal Display on the case |
Push Buttons |
Four push buttons for convenient on-site configuration |
• Physical Characteristics |
Enclosure |
SECC sheet metal (0.8 mm), providing IP30 protection |
Weight |
NPort¢ç 5610-8-DT: 1760 g NPort¢ç 5610-8-DT-J: 1170 g NPort¢ç 5650-8-DT: 1770 g NPort¢ç 5650-8-DT-J: 1710 g NPort¢ç 5650I-8-DT: 1850 g |
Dimensions |
Without ears: 197 x 44 x 135.5 mm (7.76 x 1.73 x 5.33 in) With ears: 229 x 46 x 135.5 mm (9.01 x 1.81 x 5.33 in) With DIN-Rail kit on bottom panel: 197 x 53 x 135.5 mm (7.76 x 2.09 x 5.33 in) |
• Environmental Limits |
Operating Temperature |
0 to 55¡ÆC (32 to 131¡ÆF) |
Operating Humidity |
5 to 95% RH |
Storage Temperature |
-20 to 70¡ÆC (-4 to 158¡ÆF) |
• Power Requirements |
Input Voltage |
12 to 48 VDC |
Power Consumption |
NPort¢ç 5610-8-DT: 621 mA @ 12 V, 140 mA @ 48 V NPort¢ç 5610-8-DT-J: 621 mA @ 12 V, 140 mA @ 48 V NPort¢ç 5650-8-DT: 580 mA @ 12 V, 156 mA @ 48 V NPort¢ç 5650I-8-DT: 1066 mA @ 12 V, 200 mA @ 48 V NPort¢ç 5650-8-DT-J: 580 mA @ 12 V, 156 mA @ 48 V |
• Regulatory Approvals |
Safety |
UL (UL60950-1), TÜV (EN60950-1) |
EMC |
CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A |
• Reliability |
Alert Tools |
Built-in buzzer and RTC (real-time clock) |
Automatic Reboot Trigger |
Built-in WDT (watchdog timer) |
External Device Servers
Connection Cables
|