| |
Features and Benefits
- 8 or 16 serial ports supporting RS-232/422/485
- Standard 19-inch rackmount size
- 10/100M auto-sensing Ethernet
- Built-in 15 KV ESD protection for all serial signals
- Easy IP address configuration with LCD panel
- Choice of configuration methods: Web console, Telnet console, and Windows utility
- Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
- SNMP MIB-II for network management
Overview
Network Readiness for up to Sixteen Serial Devices
The NPort® 5650 rackmount device server can conveniently and transparently connect up to sixteen serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort® device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.
19-inch Rackmount Device Server
NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and the 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operation, maintenance, and administrative tasks.
Real COM/TTY Ports
Real COM/TTY drivers are provided that make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.
LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Adjustable Termination and Pull High/Low Resistors
In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5600 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.
Appearance
Dimensions
Pin Assignment
| LAN Interface |
| Number of Ports |
1 |
| Speed |
10/100 Mbps |
| Connector(s) |
8-pin RJ45 |
| Magnetic Isolation Protection |
1.5 KV built-in |
| • Optical Fiber Interface |
| Distance |
Multi mode: 0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km)) |
| Min. TX Output |
-20 dBm (Multi mode), -5 dBm (Single mode) |
| Max. TX Output |
-14 dBm (Multi mode), 0 dBm (Single mode) |
| Sensitivity |
-34 to -30 dBm (Multi mode), -36 to -32 dBm (Single mode) |
| • Serial Interface |
| Serial Standards |
RS-232/422/485 |
| Number of Ports |
8 or 16 |
| Connectors |
RJ45 (8 pins) |
| Serial Line Protection |
15 KV ESD protection for all signals |
| RS-485 Data Direction Control |
ADDC® (automatic data direction control) |
| • Serial Communication Parameters |
| Data Bits |
5, 6, 7, 8 |
| Stop Bits |
1, 1.5, 2 |
| Parity |
None, Even, Odd, Space, Mark |
| Flow Control |
DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF |
| Baudrate |
50 bps to 921.6 Kbps |
| • Serial Signals |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 |
Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w |
Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w |
Data+, Data-, GND |
| • Software |
| Network Protocols |
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217 |
| Driver Support |
Windows Real COM driver (for Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64), Linux Real TTY driver, Fixed TTY driver (for SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i) |
| Configuration Options |
Web Console, Telnet Console, Windows Utility |
| • Mini Screen with Push Buttons |
| LCD Panel |
Liquid Crystal Display on the case |
| Push Buttons |
Four push buttons for convenient on-site configuration |
| • Physical Characteristics |
| Enclosure |
SECC sheet metal (1 mm), providing IP30 protection |
| Weight |
NPort® 5650-8: 3360 g
NPort® 5650-8-S-SC: 3380 g
NPort® 5650-8-M-SC: 3380 g
NPort® 5650-16: 3460 g
NPort® 5650-16-S-SC: 3440 g
NPort® 5650-16-M-SC: 3440 g |
| Dimensions |
Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in) |
| • Environmental Limits |
| Operating Temperature |
0 to 55°C (32 to 131°F) |
| Operating Humidity |
5 to 95% RH |
| Storage Temperature |
-20 to 75°C (-4 to 167°F) |
| • Power Requirements |
| Input Voltage |
100 to 240 VAC, 47 to 63 hz |
| Power Consumption |
NPort® 5650-8/16: 158 mA @ 100 VAC, 102 mA @ 240 VAC
NPort® 5650-8/16-S-SC: 164 mA @ 100 VAC, 110 mA @ 240 VAC
NPort® 5650-8/16-M-SC: 174 mA @ 100 VAC, 113 mA @ 240 VAC |
| Power Line Protection |
4 KV burst (EN61000-4-4: EFT/B), 2 KV surge (EN61000-4-5) |
| • Regulatory Approvals |
| Safety |
UL (UL60950-1), TÜV (EN60950-1) |
| EMC |
CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A |
| Medical |
EN60601-1-2 Class B, EN55011 |
| • Reliability |
| Alert Tools |
Built-in buzzer and RTC (real-time clock) |
| Automatic Reboot Trigger |
Built-in WDT (watchdog timer) |
| MTBF (meantime between failures) |
NPort® 5650-8: 117584 hrs
NPort® 5650-16: 104767 hrs
NPort® 5650-S-SC-8: 116914 hrs
NPort® 5650-S-SC-16: 87528 hrs
NPort® 5650-M-SC-8: 116914 hrs
NPort® 5650-M-SC-16: 87528 hrs |
External Device Servers
| |
Model No. |
Description |
|
|
|
|
|
NPort 5650-8-S-SC |
8-port RS-232/422/485 Serial Device Server, 10/100BaseF(X), Single Mode Fiber (SC Connector), 164 mA @ 100 VAC, 110 mA @ 240 VAC |
|
|
|
|
|
NPort 5650-16-S-SC |
16-port RS-232/422/485 Serial Device Server, 10/100BaseF(X), Single Mode Fiber (SC Connector), 164 mA @ 100 VAC, 110 mA @ 240 VAC |
|
|
|
|
|
NPort 5650-8 |
8-port RS-232/422/485 to Ethernet Device Server, 158 mA @ 100 VAC, 102 mA @ 240 VAC |
|
|
|
|
|
NPort 5650-16 |
16-port RS-232/422/485 to Ethernet Device Server, 158 mA @ 100 VAC, 102 mA @ 240 VAC |
|
|
|
|
|
NPort 5650-8-M-SC |
8-port RS-232/422/485 Serial Device Server, 10/100BaseF(X), Multi Mode Fiber (SC Connector), 174 mA @ 100 VAC, 113 mA @ 240 VAC |
|
|
|
|
|
NPort 5650-16-M-SC |
16-port RS-232/422/485 Serial Device Server, 10/100BaseF(X), Multi Mode Fiber (SC Connector), 174 mA @ 100 VAC, 113 mA @ 240 VAC |
|
|
|
|
Connection Cables
|
