| |
1-port RS-232 serial device servers
More Info
Most Cost-effective Serial-to-Ethernet Solution
Using serial device servers to connect legacy serial devices to Ethernet is now commonplace, and users expect device servers to be cost effective and to provide a broad selection of useful functions. With its full support of Microsoft and Linux operating systems and solid 5-year warranty, the NPort® 5100 series provides the best choice for serial-to-Ethernet converters.
Adjustable Termination and Pull High/Low Resistors
In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, the NPort® 5100 device servers come with jumpers for adjusting termination and pull high/low resistor values for each serial port.
Standard TCP/IP Interface and Broad Choice of Operation Modes
The NPort® 5100 device servers can be configured for TCP Server,TCP Client, UDP Server/Client, Pair Connection, or Ethernet Modem mode, ensuring compatibility with software based on a standard network API (e.g., Winsock or BSD Sockets).
Real COM/TTY Drivers for Existing Software
The Real COM/TTY drivers provided with the NPort® 5100 device servers allow you to continue using software designed for communicating through COM/TTY ports. Installation and configuration is painless, and allows your serial devices and PC to communicate seamlessly over a TCP/IP network. Using Moxa’s Real COM/TTY drivers is an excellent way to preserve your software investment, while still allowing you to enjoy the benefits of networking your serial devices.
Easy to Troubleshoot
NPort® 5100 device servers support SNMP V2, which can be used to monitor all units over Ethernet. Each unit can be configured to send trap messages automatically to the SNMP manager when user-defined errors are encountered. For users who do not use SNMP manager, an e-mail alert can be sent instead. Users can define the trigger for the alerts using Moxa’s Windows utility, or the web console. For example, alerts can be triggered by a warm start, a cold start, or a change in password.
Appearance
Dimensions
Pin Assignment
| LAN Interface |
| Number of Ports |
1 |
| Speed |
10/100 Mbps |
| Connector(s) |
8-pin RJ45 |
| Magnetic Isolation Protection |
1.5 KV built-in |
| • Serial Interface |
| Serial Standards |
RS-232 |
| Number of Ports |
1 |
| Connector(s) |
DB9 male |
| Serial Line Protection |
15 KV ESD protection for all signals |
| RS-485 Data Direction Control |
ADDC® (automatic data direction control) |
| • Serial Communication Parameters |
| Data Bits |
5, 6, 7, 8 |
| Stop Bits |
1, 1.5, 2 |
| Parity |
None, Even, Odd, Space, Mark |
| Flow Control |
RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF |
| Baudrate |
110 bps to 230.4 Kbps |
| • Serial Signals |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| • Software |
| Network Protocols |
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP |
| Driver Support |
Windows Real COM driver (for Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64), Linux Real TTY driver, Fixed TTY driver (for SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i) |
| Configuration Options |
Web Console, Serial Console, Telnet Console, Windows Utility |
| • Physical Characteristics |
| Enclosure |
Aluminum (1 mm) |
| Weight |
580 g |
| Dimensions |
Without ears: 52 x 80 x 22 mm (2.05 x 3.15 x 0.87 in)
With ears: 75.2 x 80 x 22 mm (2.96 x 3.15 x 0.87 in) |
| • Environmental Limits |
| Operating Temperature |
NPort 5110: 0 to 55°C (32 to 131°F)
NPort 5110-T: -40 to 75°C (-40 to 167°F) |
| Operating Humidity |
5 to 95% RH |
| Storage Temperature |
-20 to 85°C (-4 to 185°F) |
| • Power Requirements |
| Input Voltage |
12 to 48 VDC |
| Power Consumption |
128.7 mA @ 12 V, 72 mA @ 24 V |
| Power Line Protection |
1 KV burst (EN61000-4-4: EFT/B), 0.5 KV surge (EN61000-4-5) |
| • Regulatory Approvals |
| Safety |
UL (UL60950-1), CUL, TÜV (EN60950-1) |
| EMC |
CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A |
| • Reliability |
| Automatic Reboot Trigger |
Built-in WDT (watchdog timer) |
| MTBF (meantime between failures) |
279122 hrs |
|
