|
LS100 |
LS110 |
LS100W |
Serial Interface |
Male DB9 serial port |
Serial speeds: 1200bps to 115Kbps |
Flow Control: Hardware RTS/CTS |
Signals:
- LS100/100W
- RS232 : Rx, Tx, RTS, CTS, DTR, DSR, GND |
- LS110
- RS232 : Rx, Tx, RTS, CTS, DTR, DSR, GND, DCD | |
Network Interface |
10 Base-T Ethernet with RJ45 Ethernet connector |
- 802.11b WiFi with Prism III compatible chipset
- Supports Ad Hoc mode and Infrastructure mode
- Supports 128-bit WEP security
|
Supports static and dynamic IP address |
Protocols |
ARP, IP/ICMP TCP/IP Telnet DHCP client PPPoE |
ARP, IP/ICMP TCP/IP Telnet DHCP client DNS |
ARP, IP/ICMP TCP/IP Telnet DHCP client |
Serial Access port protocol : Raw TCP |
Serial Access port protocol : Telnet, TCP, UDP, RFC-2217 |
Serial Access port protocol : Raw TCP |
Security |
User ID & Password |
User ID & Password, IP Address filtering. |
User ID & Password |
Management |
- Telnet
- Serial console port
- HelloDevice Manager
|
Firmware |
- |
Upgrade using console and telnet |
- |
Diagnostic LED |
- LS100/110
- Ready - Link and Act for Ethernet - Serial Rx / Tx - Power |
- LS100W
- Power - Link and Act for WiFi - Serial Rx / Tx - Ready | |
Power |
Supply voltage = 7.5V ~ 15V DC Supply current = 300mA @ 7.5V DC |
Supply voltage = 7.5V ~ 15V DC Supply current = 300mA @ 9V DC |
Supply voltage = 9V ~ 30V DC Supply current = 300mA @ 9V DC |
Environmental |
Operating temperature: 0¡ÆC to 50¡ÆC Storage temperature: -20¡ÆC to 66¡ÆC Humidity: 90% Non-condensing |
Physical Properties |
Dimension (LxWxH) 100x 72 x 25 (mm) 3.94 x 2.83 x 0.98 (in.) |
Weight: 240g |
Weight: 300g |
MTBF |
39.45 Years |
- |
43.57 Years |
Regulatory Approvals |
FCC Part 15 Subpart B, Class A EN61000-3-2, EN61000-3-3 EN60950-1 EN55022 EN55024 MIC |
Warranty |
5-year Limited Warranty |